Menu

Commodity Search Form

PLASTICS

Description: ALKYLD MOLDING MATERIAL 1. (a) Material cannot be molded satisfactorily. Electrical and mechanical properties seriously impaired or reduced to unacceptable levels. (b) Material is irrecoverably damaged. (c) Material cannot be molded satisfactorily. Electrical and mechanical properties reduced to unacceptable levels. (d) It is sometimes possible to recover part of the value of the material damaged under conditions (a) and (c) by reprocessing on the original manufacturing plant. 2. (a) Material hardens and is irrecoverably damaged. The material should be stored in a cool place below deck. PHENOLIC MOLDING MATERIAL 1. (a) Material cannot be molded satisfactorily. Electrical and mechanical properties seriously impaired or reduced to unacceptable levels. (b) Material is irrecoverably damaged. (c) Material cannot be molded satisfactorily. Electrical and mechanical properties reduced to unacceptable levels. (d) It is sometimes possible to recover part of the value of material damaged under conditions (a) and (c) by reprocessing on the original manufacturing plant. 2. (a) Material hardens and cannot be recovered. The material should be stowed in a cool place below deck. POLYTHENE SHEET 1. (a), (b), (c) No effect. (d) Material can be washed and dried. Drying should take place at temperatures not above 150 degrees F. 2. (a) Material melts. This material is inert and very free of inherent vice, but should be kept away from heat.
Index: 587
Commodity Name: PLASTICS

Commodity Search